
Proving Loss Control Works: Connecting a Fund’s Safety Work to Its Claims
- In private industry, Michigan’s 2024 injury and illness rate was 2.5 cases per 100 full-time equivalent workers, above the national rate of 2.3, the U.S. Bureau of Labor Statistics reports.
- MIOSHA’s 2026 focus on contact hazards, such as being struck by objects or caught in equipment, gives a fund a starting map for where loss control can do the most good.
- Prove what loss control delivers by lining up each member’s safety work with its claims, measured against payroll, across several quarters and fund years.
The Short Version
The whole story in about a minute.
Safety is one of the main topics Michigan’s group funds write about for their members. Showing that the work pays off is the harder job. Connecting workers’ comp loss control to a fund’s own claim trend turns each visit and training session into results that members and trustees can see.
Much of that work happens on an ordinary morning. A supervisor is showing a new hire the right way to lift when a loss control rep arrives for an early Tuesday visit. After watching, the rep walks the floor with the supervisor and leaves the member employer’s site with notes on two hazards to fix and a training date for the second shift.
When the trustees meet six months later, they ask the core question of workers’ comp loss control: is the safety program making a difference? Everyone in the room believes it is, but the evidence is spread out. The visit notes are in one file, the claims are with the service company, and payroll is somewhere else. Turning that into one clear answer can take days.
The first step is knowing where workplace risk in Michigan is pointing in 2026 and how the state’s injury rates compare with the nation’s.
What the data shows: Michigan’s workplace risk in 2026
The Michigan Occupational Safety and Health Administration (MIOSHA) is pointing at a short list of hazards and industries this year, and Michigan’s private employers reported injuries at a higher rate than the nation’s in 2024. Both give a fund a starting map for where loss control can do the most good.
MIOSHA’s focus: contact hazards and high‑hazard industries
In the fall 2026 edition of the MIOSHA News, published September 30, 2026, MIOSHA Director Bart Pickelman wrote, “We are continuing our efforts to raise awareness of hazards that can result in workers being struck by objects or vehicles, caught in equipment or struck against objects.” He named the Contact Fatalities State Emphasis Program as one of the ways the agency is encouraging employers and workers to recognize these hazards.
The same edition names wood product manufacturing as one of 10 high-hazard industries MIOSHA is targeting in its 2024 to 2028 strategic plan. The industry has “approximately 560 employers and 9,900 workers” in Michigan. The newsletter also describes an October 2025 inspection at a wood truss maker with 10 employees that “resulted in 13 citations, including nine serious and four other-than-serious citations.”
The stakes show up in MIOSHA’s own count. In a release dated July 28, 2026, the agency said 21 workplace fatalities had been reported to it so far that year, and it pointed to “three recent trench collapses in Michigan within a two-day period.” Pickelman’s words in that release are worth keeping close: “Every workplace death is a tragedy, and recent incidents are a reminder that conditions can change quickly.”
Free and low‑cost help a fund can point members to
MIOSHA’s Consultation Education and Training (CET) Division “provides onsite consultation, hazard surveys, and training at little to no cost to employers,” according to the fall newsletter. Members can ask for that help through MIOSHA’s online request for free consultation. The agency’s annual Take a Stand for Workplace Safety and Health event also gives employers a voluntary, penalty-free setting to work with its safety and health professionals. In 2026, 208 employers took part.
How Michigan’s injury rates compare with the nation’s
In private industry, Michigan’s rate is higher. The state’s private employers reported 76,700 nonfatal workplace injuries and illnesses in 2024, a rate of 2.5 cases per 100 full-time equivalent workers, against a national rate of 2.3. That’s from the U.S. Bureau of Labor Statistics (BLS) release of February 10, 2026. Three industry groups accounted for 70 percent of those cases while holding 55 percent of private employment: manufacturing, education and health services, and trade, transportation, and utilities.
Michigan’s public employers come in below the national rate. The state and local government sector reported 14,100 cases in 2024, a rate of 3.8 per 100 full-time workers, against a national rate of 4.4.
These are statewide numbers, and every fund’s membership is its own mix. A fund’s own claims will say more, and that’s where proving loss control begins.
Why the proof is hard to pull together
The safety work and its results are usually kept apart. Whether a fund’s workers’ comp loss control comes from its own staff, its service company, or a contracted provider, the visit reports and training records can end up in a different place from the claims. The claims are handled by the service company, unless the fund is approved to handle its own. Payroll, the number that puts claims in context, belongs to billing and audit.
When trustees ask whether the program is working, someone has to match those records by member and by period, which can mean doing it by hand. We’ve written before about why centralized data matters for risk management. For a group fund, the point is practical. The people out on member sites deserve to see what their work is achieving, and so do the trustees.
There’s a bigger reason the link matters. Safer workplaces mean fewer claims, and claims that cost less leave a fund year in better shape when the trustees look at surplus. Members feel that result directly, which makes loss control one of the clearest ways a fund shows its value.
Leading and lagging indicators for workers’ comp loss control
OSHA’s page on leading indicators splits safety measures into two kinds. Leading indicators are “proactive and preventive measures that can shed light about the effectiveness of safety and health activities.” Lagging indicators “measure the occurrence and frequency of events that occurred in the past, such as the number or rate of injuries, illnesses, and fatalities.”
OSHA sums up how the two work together: “A good safety and health program uses leading indicators to drive change and lagging indicators to measure effectiveness.”
In a fund’s terms, the leading side is the loss control work itself: visits made, training delivered, and hazards found and corrected at each member. The lagging side is the claim trend: how often members’ workers are hurt, and what those claims cost, relative to payroll. Making the case means comparing the two for the same member, the same location, and the same stretch of time.
What a fund can do now
Start with the records you already keep. The goal is to line up visits and training with the claims, member by member.
- Tie every visit and training session to a member and a location. A visit report that names the member, the site, and the class code can be matched to that member’s claims later.
- Measure claims against payroll. Tracking claim frequency and claim costs this way, before and after a visit or a training push, keeps a growing member from looking worse than it is.
- Read results by member industry. Aim visits where MIOSHA’s priorities and your own trend overlap, such as members working around moving equipment and members in wood products. Sites bringing on new hires are worth a look, too. For more on the workforce itself, see our recap of what NCCI’s 2026 Annual Insights Symposium showed about an older and newer workforce.
- Give the trend time. Lagging indicators move slowly, so look across several quarters and fund years before drawing conclusions.
- Share what’s working. A member that sees its own claims ease after a round of training has a reason to keep inviting the rep back. Trustees who see the same link can weigh the program with confidence.
Questions funds ask about loss control
How can a self‑insured group show its loss control program is working?
Track leading indicators (visits, training, and hazards corrected) beside lagging indicators (claim frequency and claim costs, measured against payroll). Line them up by member, location, and time period, and watch how they change across fund years. That gives trustees a clear view of the link between the program and the claims.
What’s the difference between leading and lagging safety indicators?
Leading indicators measure the prevention work that happens before an injury. Lagging indicators measure what already happened, such as the number or rate of injuries and illnesses. OSHA’s guidance is to use leading indicators to drive change and lagging indicators to measure effectiveness.
What are MIOSHA’s safety priorities in 2026?
MIOSHA’s fall 2026 newsletter highlights hazards “that can result in workers being struck by objects or vehicles, caught in equipment or struck against objects,” through its Contact Fatalities State Emphasis Program. Its 2024 to 2028 strategic plan targets 10 high-hazard industries, including wood product manufacturing.
Is Michigan’s workplace injury rate higher than the national rate?
In private industry, yes. BLS reports Michigan’s 2024 rate at 2.5 cases per 100 full-time equivalent workers. The national rate was 2.3. Michigan’s state and local government rate of 3.8 was below the national rate of 4.4.
Safety that follows the data
Back at that member’s site, the rep’s notes describe one good morning. Matched with that member’s claims and payroll over the next few fund years, they become part of the answer the trustees asked for.
Workers’ comp is all we do at True. With our platform, claims and payroll data could sit side by side, in reports you can build and drill into. Patterns could show up sooner, so safety visits and training go where they help members most. Technology should carry the busywork, so you can carry the people.
If showing trustees what your safety program delivers is on your fund’s list for the year ahead, I’d be glad to talk it through. See how True works with Michigan’s group funds.

Ryan Smith is the Senior Solutions Advisor at True, and a full-time hockey, soccer, and baseball dad according to his four kids.
More worth your time.
Harnessing the Power of Big Data to Fuel Growth in Workers’ Compensation
Unlock the potential of big data to drive organizational growth in the workers’ compensation industry.
Why Centralized Data is Essential for Effective Risk Management in Insurance
This blog explores the importance of centralized data in risk management, highlighting how unified systems enhance the ability to identify, assess, and manage risks in insurance.
The Future of Insurance: Centralized Data Systems Explained
This blog delves into the benefits of centralized data systems in the insurance industry, highlighting their role in improving security and operational efficiency.
Get the good stuff in your inbox.
Subscribe to True Insight for a curated set of workers’ comp news, trends, and reports — occasional, and always 100% spam-free.
Join our community of insurance & workers’ comp professionals. Unsubscribe anytime.